Whether it’s a new facility or existing structure, building owners and facilities managers are constantly looking for measures to implement which will help them on their way to becoming a sustainable building in Vancouver. Just because the initial build of the building wasn’t designed green does not mean a facility can’t work towards efficiency. By making energy efficiency a priority in their buildings, owners and managers can begin making the move towards sustainability right now.

By putting the following ideas into practice, building owners and facilities managers can become a more sustainable building in Vancouver.

sustainable-building-vancouver

Measure Consumption

Begin by measuring the facility’s energy and water usage. By establishing a baseline, a building owner or facility manager can continue to measure usage.

 

Audit Energy Use

The facility’s energy usage can also be analyzed in order to discover areas which can be improved upon. Evaluate the building regularly to look for ways unnecessary energy use can further be eliminated.

 

Spread the Word

Building owners should notify occupants in order to raise awareness of energy use and energy management goals. By raising awareness, more support can be garnered for the initiatives being put into place.

 

Replace Lighting

Facility managers can begin moving towards energy efficiency with simple lighting changes. By replacing incandescent bulbs with CFLs or LEDs, energy use can be reduced as well as maintenance needs, as these bulbs have a much longer service life. They also produce less heat, which will help to reduce the building’s cooling load.

 

Lower the Flow

Installing low flow faucets and flush fixtures in areas like employee restrooms will help the facility to lower water usage.

 

Evaluate Electronics

Many office electronics are major energy consumers. As upgrades are needed, business owners should strongly consider replacing with energy smart models and recycling older, inefficient products.

 

Utilize Sensors

Remove the human element of energy waste by installing sensors. Photo sensors and occupancy sensors monitor for daylight and occupant use, and will help eliminate the use of unneeded energy. Sensors can also be used to control heating and air conditioning in Vancouver.

 

Create Shade

For buildings with large window bays, solar shades can be installed to greatly reduce the amount of heat gain which comes from sunlight exposure. This can reduce the building’s cooling load and cut cooling energy use.

 

Improve Air Quality

Improving air quality can have a positive effect on productivity, which will help sustainable buildings in Vancouver reach their efficiency goals. Utilize high efficiency filters for HVAC systems and make it a priority to check and change them often. When making building improvements, stick to low-VOC (Volatile Organic Compounds) paints and adhesives.